在线客服系统
Products
HZDL-200III 3 Phase Primary Current Injection Tester
HZDL-200III 3 Phase Primary Current Injection Tester
Contact us
HZDL-200III 3 Phase Primary Current Injection Tester
Overview
1.Use
HZDL-200III high current generator (referred to as three-phase current booster)
is a test equipment developed by our company. It integrates the advantages of similar
products at home and abroad. It adopts numerical control technology and has strong
anti-interference ability. Compared with the converter, the converter has the
advantages of large output power, small size and light weight due to the use of low
power consumption, large capacity self-coupling voltage regulator and high magnetic
permeability iron core. Mainly used for thermal relay, motor protector, contactor,
circuit breaker, air switch, switch cabinet, circuit breaker, protection screen
calibration.
2.Features
Using beautiful and elegant PVC panel
Display the primary current directly, which is convenient for test observation
and recording.
High measurement accuracy: 0.5 class
High power, small size and strong load capacity
Small size and light weight, the volume is only 30% to 70% of similar
products, and it is very convenient to move.
3.Operation
1After the wiring is completed, check it again to see if there is any wiring error and
whether the connectors are in good contact.
2During the test, if there is any abnormal phenomenon such as ignition and no
display when starting up, immediately turn off the power and recheck the wiring.
3 During the actual wiring, the current output terminal should form a loop,
otherwise the instrument will not output current.
4The current riser has random output wires; the output external copper wires are
selected according to 50A/mm². (The standard configuration is two 3-meter test leads)
15The capacity of the equipment is designed for short-time work of 10 minutes. If it
is used for batch testing, the working time should be less than 2.10 minutes, and the next
work will be performed after waiting for 10 minutes. If the temperature rise (30 minutes -
24 hours) should be prepared according to the long-term working temperature rise.
II. Technical characteristics
1.Name and Classification
1Name: HZDL-200III Three-phase Primary Current lnjection Tester.
2Environmental category: It belongs to the group III instruments in GB61087.1-86
"Environmental Test of Electronic Measuring Instruments" (can be used in outdoor
environment).
2. 1 Input voltage: AC 380/220V 100Hz three-phase four-wire
2. 2 Power: 1KVA 1*3
2. 3 Output current: AC0200A *3 steplessly adjustable, panel with digital ammeter
2. 4 Output voltage: (>3V)
2. 10 Output waveform: The output current is a standard sine wave with tiny burrs, which is
better than the power system requirements and standards, and the ripple
coefficient is less than 0.3%. Standard sine wave.
2. 6 Measurement accuracy: (using 0.2S grade material) is actually around 0.3; each
current can be adjusted smoothly and continuously, with an accuracy
higher than 0.10.
2. 7 Output current mode: the true RMS value is continuously adjustable;
2.8 Current stability: 0.2%
2.9 Structural form: one piece
2.10 Wiring method: according to requirements 2.12 Protection settings: overcurrent,
overvoltage


Related products

Huazheng HZDL130 primary current injection test set primary current injection tester for sale primary injection testing equipment

Huazheng HZDL500A 500A Primary Current injection tester

Huazheng 3 phase primary current injection tester multifunction 200A primary current injection test set

Huazheng Electric HZDL-5371L Primary Current Injection Tester

Huazheng Electric HZDL1000AH Customizable 1000A Primary Current Injection Tester

Huazheng HZ5376 6000A Primary Current Injection Test Set

Huazheng Electric HZ5374 3 phase 4000APrimary Current Injection Tester

HZDL-200III 3 Phase Primary Current Injection Tester

Huazheng Electric HZDL-30000A Primary Current lnjection Tester

Huazheng Electric HZ5373 3000A primary current injection test set

Huazheng Electric HZ5372 2000A Primary Current Injection Tester

Huazheng Electric HZDL-N2 Primary Current Injection Tester Digital Primary Current Injection Test System

Huazheng HZ-109S2 Primary Current Injection Tester Primary Current Injection Test Device Automatic Primary Current Injection Test Device

Huazheng HZ-109S large current primary current injection test set primary current injection test set high precision primary current injector tester

+8618330222305 +8618330222305 sales08@bdhuazheng.com 0086-18330222305 Julia Jin-huazheng