Instructions:1. Before the measurement, the power supply of the device under test must be cut off, and ground short-circuit discharge is required. Never allow equipment to take real-time measurements to ensure the safety of people and equipment. For equipment that may induce high voltages, this poss
View detailsA UV imager is a high-voltage electrical device. Corona, flashover or arcing often occurs due to design, manufacture, installation, maintenance, etc. During discharge, the electrons in the air continuously gain and release energy, and when the electrons release energy (ie discharge), they emit ultra
View detailsOil CupCleaningMethodAndCommonFaultClearances1. Oil Cup Cleaning Method⑴Wipe the electrode surfaces and bars again and again with clean silk cloth.⑵Adjust the electrode distance with standard gauge.⑶Use petroleum ether (other organic solvents
View detailsI.System protection1.Emergency buttonIn order to disconnect the power supply quickly when an emergency is detected during the test, an emergency stop button is provided on the operation panel, and the test circuit can be quickly broken by pressing it for emergency use.2.Warning LightThe system
View detailsCommon faults and solutions of DC high voltage generators:1. When the power switch is turned on, the digital display of the control box on the DC high voltage generator does not light up.Solution:Please check the working power connection and all labor insurance tubes. If the insurance tube is damag
View details